0 Items $0.00
How Electronic Cigarettes Work

NLA How To Video




Contents vary by kit:

• NLA rechargeable lithium ion smart Z chip battery (this is the longest part of the unit that has red led light)

• Atomizer (small silver piece that connects the battery to the cartridge) *Big Smoke series do not have a visible atomizer, because it is built in to the cartridge.

  • Cartridges(the tips serve as the cigarette butt of the unit) in the flavor & strength of your choice
  • USB charger (plugs in directly into a computer and is the universal adapter for any of our charger accessories.)

•Wall charger (plugs into a standard wall outlet)

  • Car charger (plugs into a standard car charging outlet)





Initial Use

•For optimal performance, it is recommended that you fully charge the batteries.

•You will notice that one of the batteries and the atomizer are pre-assembled along with an empty cartridge. Simply replace the empty cartridge with a full one by placing it firmly onto the atomizer and twist slightly to secure.
note: With our Big Smoke model the atomizer is built in every cartridge, simply screw the cartridge onto the battery "twist and go™"


•There is no on or off switch. As you inhale, the NLA LED light at the tip glows like a real cigarette to let you know its working.

Charging Batteries:

•To charge the batteries using the USB charger, Screw the battery into the USB charger. With our Big Smoke series, gently push the battery into the usb adapter and plug it into a computer or any of our charger accessories. 

•Connect the male end of the charger to the female end of the cordless wall adapter and plug it into the nearest outlet. A red charger light indicates the battery is charging. The light turns blue when the battery has been fully charged and can be removed from the charger. The light on our Prestige model simply turns off when the battery is fully charged.

•To charge the batteries using your computer, simply screw the battery into the USB charger, and then plug the charger into any available USB port. The LED light at the end of the battery will flash and the USB charger light will turn red letting you know it is charging. When the charger light turns blue, the battery is fully charged.

•Charging your NLA  batteries to capacity takes approximately 1-2 hours.Replacing Batteries Each battery should provide approximately two cartridges of use before requiring a recharge.

•When the battery is depleted, the NLA LED at the end of the battery will blink 30 times intermittently.

•To replace the empty battery, secure the cartridge in one hand and unscrew the battery from the atomizer.

•Grab the fresh battery and reattach it to the atomizer. When you're finished, recharge the empty battery by screwing it back into the receptor.

•Remember to unscrew a newly charged battery from the receptor when the light goes out. Note: During use, the LED light will flash 10 times to warn you that you are overusing your NLA and you should take a break. This does not affect performance and does not mean you should recharge.

Replacing Cartridge

On average, each individual cartridge supplies enough nicotine and premium flavoring to accommodate approximately 100 puffs. When the cartridge no longer produces vapor, you'll know it's time for a replacement.

•To replace the cartridge, hold the battery with one hand and pull off the empty one.

•Check the atomizer for any foil residue and gently brush it aside using your fingers.

•Firmly apply a full cartridge to the atomizer, twist it slightly to make sure it is secure.
 


My Account | About Us | Contact Us | Privacy Policy | Terms of Use | Shipping Policy | Sitemap
Copyright ©2010 NeverLightAgain.com

 


Online Credit Card Processing